ds107-1 (v2.0) august 9, 2013 www.xilinx.com 1 product specification ? 2002?2013 xilinx, inc. all rights reserved. all xilinx trademarks, registered trademarks, patents, and disclaimers are as lis ted at http://www.xilinx.com/legal.htm . all other trademarks and registered trademarks are the property of their respective owners. all specifications are subject to c hange without notice. ? obsolete ? obsolete ? obsolete ? obsolete ? introduction the spartan?-xl 3.3v fpga automotive iq product family is a high-volume production fpga solution that delivers all the key requirements for asic replacement up to 40,000 gates. these requirements include high-performance, on-chip ram, core solutions, and prices that, in high vol- ume, approach and in many cases, are equivalent to mask programmed asic devices. by streamlining the spartan-xl series feature set, leveraging process technology and focusing on total cost management, the spartan-xl series delivers the key features required by asic and other high-volume logic users while avoiding the initial cost, long development cycles, and inherent risk of conventional asics. features ? guaranteed to meet full electrical specifications over t j = ?40c to +125c ? asic replacement fpga for high-volume production with on-chip ram ? density up to 1,862 logic cells or 40,000 system gates ? streamlined feature set based on xc4000 architecture ? broad set of alliancecore? and logicore? predefined solutions available ? unlimited reprogrammability ? system level features - on-chip selectram? memory - full readback capability for program verification and internal node observability - dedicated high-speed carry logic - internal 3-state bus capability - eight global low-skew clock or signal networks - ieee 1149.1-compatible boundary scan logic - footprint compatibilit y in common packages ? fully supported by powerful xilinx development system - ise foundation? series: integrated, shrink-wrap software - ise alliance series?: dozens of pc and workstation third party development systems supported - fully automatic mapping, placement and routing ? 3.3v supply for low power with 5v tolerant i/os ? power down input ? higher performance ? faster carry logic ? more flexible high-speed clock network ? latch capability in configurable logic blocks ? input fast capture latch ? optional mux or 2-input function generator on outputs ? 12 ma or 24 ma output drive ? enhanced boundary scan ? express mode configuration ? refer to spartan-xl and spartan fpgas complete data sheet (ds060) for product description, ac and dc specifications 0 spartan-xl 3.3v fpga automotive iq family: introduction and ordering ds107-1 (v2.0) august 9, 2013 00 product specification r ta bl e 1 : spartan-xl field programmable gate arrays device logic cells max system gates typical gate range (logic and ram) (1) clb matrix total clbs no. of flip-flops max. avail. user i/o total distributed ram bits xcs05xl 238 5,000 2,000-5,000 10 x 10 100 360 77 3,200 XCS10XL 466 10,000 3,000-10,000 14 x 14 196 616 112 6,272 xcs20xl 950 20,000 7,000-20,000 20 x 20 400 1,120 160 12,800 xcs30xl 1,368 30,000 10,000-30,000 24 x 24 576 1,536 192 18,432 xcs40xl 1,862 40,000 13,000-40,000 28 x 28 784 2,016 224 25,088 notes: 1. max values of typical gate range include 20-30% of clbs used as ram.
spartan-xl 3.3v fpga automotive iq family: introduction and ordering 2 www.xilinx.com ds107-1 (v2.0) august 9, 2013 product specification r ? obsolete ? obsolete ? obsolete ? obsolete ? dc specifications spartan-xl absolute maximum ratings (1) spartan-xl recommended operating conditions symbol description min max units v cc supply voltage relative to gnd (2) ?0.5 4.0 v v in input voltage relative to gnd (2,3) ?0.5 v cc + 0.5 v v ts voltage applied to 3-state output (2,3) ?0.5 v cc + 0.5 v t stg storage temperature (ambient) ?65 +150 c t j junction temperature - +135 c notes: 1. stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under operating condi tions is not implied. exposure to absolute maximum ratings conditions for extended periods of time may affect device reliability. 2. with 5v tolerant i/os selected, the maximum dc overshoot must be limited to either +5.5v or 10 ma and undershoot (below gnd) must be limited to either 0.5v or 10 ma, whichever is easier to achieve. 3. with 5v tolerant i/os selected, the maximum ac (during transitions) conditions are as follows; the device pins may undershoot to ?2.0v or overshoot to + 7.0v, provided this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater than 100 ma. 4. without 5v tolerant i/os selected, the maximum dc overshoot or undershoot must be limited to either 0.5v or 10 ma, whichever is easier to achieve. 5. without 5v tolerant i/os selected, the maxi mum ac conditions are as follows; the devi ce pins may undershoot to ?2.0v or overs hoot to v cc + 2.0v, provided this overshoot or undershoot lasts no more than 11 ns with a forcing current no greater than 100 ma. 6. for soldering guidelines, see the package infomation on the xilinx website. symbol description min max units t j junction temperature ?40 +125 c v cc supply voltage relative to gnd 3.0 3.6 v v ih high-level input voltage (1) 50% of v cc 5.5 v v il low-level input voltage (1) 0 30% of v cc v t in input signal transition time - 250 ns notes: 1. input and output measuremen t threshold is ~50% of v cc .
spartan-xl 3.3v fpga automotive iq family: introduction and ordering ds107-1 (v2.0) august 9, 2013 www.xilinx.com 3 product specification r ? obsolete ? obso lete ? obsolete ? obsolete ? spartan-xl product availability ta bl e 2 shows the package and speed grades available for spartan-xl family devices. ta bl e 3 shows the maximum user i/os available on the device and the number of user i/os available for each device/package combination. ta bl e 2 : spartan-xl package and speed grade availability device pins 100 144 208 256 type plastic vqfp plastic tqfp plastic pqfp plastic bga code vq100 tq144 pq208 bg256 xcs05xl -4 q - - - XCS10XL -4 q - - - xcs20xl -4 q q q - xcs30xl -4 - q q - xcs40xl -4 - - q q notes: 1. q = automotive iq, t j = ?40 c to +125 c ta bl e 3 : spartan-xl user i/o chart device max i/o package type vq100 tq144 pq208 bg256 xcs05xl 80 77 - - - XCS10XL 112 77 - - - xcs20xl 160 77 113 160 - xcs30xl 192 - 113 169 - xcs40xl 224 - - 169 205
spartan-xl 3.3v fpga automotive iq family: introduction and ordering 4 www.xilinx.com ds107-1 (v2.0) august 9, 2013 product specification r ? obsolete ? obsolete ? obsolete ? obsolete ? ordering information revision history the following table shows the revision history for this document. date version description 07/17/2002 1.0 initial xilinx release. 02/03/2003 1.1 added reference to spartan/xl data sheet in features. 04/29/2003 1.2 updated v cc max from 7.0v to 4.0v. 06/14/2004 1.3 updated the xcs20xl, vq100 cells of ta bl e 2 and ta b l e 3 . 10/18/2004 1.4 added "not to be used in new designs" watermark; moved to "mature products" 08/09/2013 2.0 this product is obsolete/discontinued per xcn11010 . xcs20xl -4 pq 208 q example: temperature range number of pins package type device type speed grade device ordering options device speed grade number of pins / package type temperature range (t j ) xcs05xl -4 standard performance vq100 100-pin plastic very thin qfp q = automotive iq ?40c to +125c XCS10XL tq144 144-pin plastic thin qfp xcs20xl pq208 208-pin plastic qfp xcs30xl bg256 256-ball plastic bga xcs40xl
|
